EtherNet/IP to Serial DA


This product complements our hugely successful DeviceNet to Serial DA Interface.

Communications with all types of plant floor equipment is now a standard requirement. One of the major hurdles when connecting multiple devices back to a common processor is the number of communication ports that are required and the complexity of writing the protocol driver.

This product will enable you to quickly and easily integrate any serial device into your EtherNet/IP installation. Data to be transmitted is received from the PLC over EtherNet/IP and transmitted over the serial link. Data received on the serial link is transmitted to the PLC over EtherNet/IP. The simplicity of the mapping of data directly into the PLC data table makes connection to serial devices so much easier and faster.


  • 10/100Mbit RJ45 EtherNet/IP interface
  • RS232, RS485 or RS422 Serial Interface
  • Standard D9 connector or screw terminals
  • Serial baud rates 1200-57600
  • 1 x 24V digital input (can be configured as scanner trigger)
  • 1 x 24V digital output
  • Rugged DIN rail mounted aluminium enclosure
  • Simple and easy to use interface
  • Web server diagnostics and configuration
  • Cost effective
  • Isolated module power and I/O power connections
  • Multiple IP address configuration options