16 Way Relay Output Modules

Item #76

  • 16 way relay outputs from 24VDC PLC module
  • Normally open contacts rated at 230 VAC
  • Contacts 5 Amp rating
  • On / Off LED indication for each output
  • Blown fuse LED indication
  • Numbering systems to suit different PLCs
  • Spring cage connectors
  • DIN rail mount
  • Common ribbon cable configuration

Save time and cost while protecting your valuable automation investment.

 

Note: PLC to module wiring assembly is not included with the fuse block - order separately. Cabling comes factory assembled and tested - just plug it in, connect the field wiring and run.

 

This product is designed to meet Council Directive 73/23/EEC low voltage, by applying the safety requirements EN 61131-2.  This equipment is classified as open equipment and must be installed (mounted) in an enclosure during operation as a means of providing safety protection



Specification sheet (click for more)
Number of Outputs
16
Module Current
5 Amps @ 24VDC
Initial Resistance @ 23 degrees C
Min  0.18 ohms
Max  0.40 ohms
Thermal Dissipation
10.37 BTU/hr @ 60 degrees C
Post Trip Resistance
0.60 ohms
Normal Voltage Range
10 to 32VDC
Maximum Voltage
60VDC
Diagnostic Functions
LED indication
Termination
Spring Clamp
Mounting
DIN Rail EN50 022,35,45
Field conductor size
Solid - 0.2 to 2.5mm
Flexible - 0.2 to 1.5mm
AWG - 24 to 14
Environmental Conditions
- Operating Temperature
- Storage Temperature
- Relative Humidity
 
0 to 60 degrees C
-40 to 85 degrees C
5 to 95% noncondensing
Dimensions (W x H x L)
77mm x 51mm x 224mm
 
 
Ordering Details
 
32 way fused Output module
MOP-32RO
Ribbon Connector for 36 way swing arm
MOP-C36-t-x.x
 
x.x denotes length in metres
 
t denotes PLC Type