16 Way Fused Digital Output Modules

Item #21

Mo'protection is a PLC I/O wiring system that provides fused protection to reduce exposure from component failure that could cripple an automated plant. In addition to the increased protection this PLC I/O wiring system minimises PLC panel assembly time. It has factory assembled wiring looms and DIN rail mounted chassis.
Mo'protection is suitable for all makes of PLCs, including Rockwell, Schneider, Omron, Honeywell, Modicon, Siemens, etc.
Features
16 or 32 fused outputs
Numbering systems to suit different PLCs
Spring cage connectors
Individual resettable electronic fuses
Blown fuse indication
Output active indication
DIN rail mount
Common ribbon cable configuration
Compact version available
* Note: PLC to module wiring assembly is not included with the fuse block - please enquire
This product is designed to meet Council Directive 73/23/EEC low voltage, by applying the safety requirements EN 61131-2.  This equipment is classified as open equipment and must be installed (mounted) in an enclosure during operation as a means of providing safety protection

 

  • 16 way individually electronically fused outputs
  • Numbering systems to suit different PLCs
  • Spring cage connectors
  • Blown fuse indication
  • On / Off LED indication
  • DIN rail mount
  • Common ribbon cable configuration

Save time and cost while protecting your valuable automation investment.

 

Note: PLC to module wiring assembly is not included with the fuse block - order separately. Cabling comes factory assembled and tested- just plug it in, connect the field wiring and run.

 

This product is designed to meet Council Directive 73/23/EEC low voltage, by applying the safety requirements EN 61131-2.  This equipment is classified as open equipment and must be installed (mounted) in an enclosure during operation as a means of providing safety protection



Specification sheet (click for more)
 Specifications
 
 Number of Outputs
 16
 Normal Voltage Range
 10 to 32VDC
 Maximum Voltage
 60VDC
 Fuse Type
 Self Resetting PolyFuse
 Fuse Current
 Hold: 750mA per output
 Trip: 1.5A per output
 One Hour Post Trip Resistance
 0.6 Ohms
 Module Current
 2.5 Amps @ 24VDC
 Initial Resistance @ 25 ºC
 Min: 0.25 Ohms, Max: 0.40 Ohms
 Thermal Dissipation
 10.37 BTU/hr @ 60  ºC
 Termination
 Spring Clamp
 Field Conductor Size
 Solid - 0.2 to 2.5mm
 Flexible - 0.2 to 1.5mm
 AWG - 24 to 14
 Mounting
 DIN Rail EN50 022,35,45
 Operating Temperature
 0 to 60 ºC
 Storage Temperature
 0 to 85 ºC
 Relative Humidity
 5 to 95% non condensing
 16-Way Dimensions (L x W x H) (mm)
 102 x 78 x 53
 32-Way Dimensions (L x W x H) (mm)
 183 x 78 x 53
 Power LED Indicator
 Off = 24VDC supply not connected
 On = 24VDC supply connected
 Output LED Indicators
 Off = Output Off
 Green = Output On and fuse OK
 Red = Output On and fuse blown