16 Way Fused Analogue Input Module

Item #73

  •       16 channel analogue input
  •       Current / voltage input or single ended / differential
  •       Numbering systems to suit different PLCs
  •       Spring cage connectors
  •       Individual glass fuse protection
  •       DIP switches for channel configuration
  •       In-circuit current test points
  •       DIN rail mount
  •       Common ribbon cable configuration

Save time and cost while protecting your valuable automation investment.

 

Note: PLC to module wiring assembly is not included with the fuse block - order separately. Cabling comes factory assembled and tested - just plug itin, connect the field wiring and run.

 

This product is designed to meet Council Directive 73/23/EEC low voltage, by applying the safety requirements EN 61131-2.  This equipment is classified as open equipment and must be installed (mounted) in an enclosure during operation as a means of providing safety protection



Specification sheet (click for more)
 Specifications
 
 Number of Outputs
  16
 Normal Voltage Range
 10 to 32VDC
 Maximum Voltage
 60VDC
 Fuse Type
 Standard blow 20x5mm glass fuse
 Fuse Current
 100mA per channel
 Module Current
 1.0 Amp
 Termination
 Spring Clamp
 Field Conductor Size
 Solid - 0.2 to 2.5mm
 Flexible - 0.2 to 1.5mm
 AWG - 24 to 14
 Mounting
 DIN Rail EN50 022,35,45
 Operating Temperature
 0 to 60 ºC
 Storage Temperature
 0 to 85 ºC
 Relative Humidity
 5 to 95% non condensing
 8-Way Dimensions (L x W x H) (mm)
 102 x 78 x 66
 16-Way Dimensions (L x W x H) (mm)
 180 x 78 x 66
 Power LED
 Off = 24VDC supply not connected
 On = 24VDC supply connected