16 Way Compact Fused Analogue Input Module

Item #96

  • Single ended current
  • Individual glass fusing
  • 8 x 0VE and shielding termination points
  • In circuit current testing
  • Power on/off LED indication
  • 50 way IDC header with standard ribbon cable to any make of PLC
  • DIN rail mounted
  • Numbering to match the PLC Module type

Save time and cost while protecting your valuable automation investment.

 

Note: PLC to module wiring assembly is not included with the fuse block - order separately. Cabling comes factory assembled and tested- just plug it in, connect the field wiring and run.

 

This product is designed to meet Council Directive 73/23/EEC low voltage, by applying the safety requirements EN 61131-2.  This equipment is classified as open equipment and must be installed (mounted) in an enclosure during operation as a means of providing safety protection



Specification sheet (click for more)
003-2032-010
CMOP-16AI-0 (terminals labeled 0-15)
003-2032-012
CMOP 16AI-1 (terminals labeled 1-16)
 
 
Number of Inputs
16
Normal Voltage Range
10 to 32VDC
Maximum Voltage
48VDC
Input Type
Single Ended Analogue Current
Fuse Type
Standard Blow 20x 5mm Glass Fuse
Fuse Rating
100mA
Total Module Current
1.6A
Diagnostic Functions
In Circuit Current Test Points on each channel
Termination
Spring Clamp
Mounting
DIN Rail EN50 022,35,45
Field conductor size
Solid - 0.2 to 2.5mm
Flexible - 0.2 to 1.5mm
AWG - 24 to 14
Operating Temperature
0 to 60 degrees C
Storage Temperature
40 to 85 degrees C
Relative Humidity
5 to 95% non condensing
Dimensions (W x H x L)
78mm x 51mm x 136mm
 
 
Ribbon Connector for 36 way Terminal Block
MOP-C36-t-x.x
X.x denotes length in metres
t denotes PLC type